ARP flywheel master bolt

[Simons]

Hi! I brought a kit of ARP bolts for my audi S2 3B flywheel, and there is one of them is a master bolt, but haven't got any idea about in which hold should be put...somebody know it??

Thanks!

[Jamo]

Simple, It will only fit in one hole as the bolt is bigger than the other ones

[Simons]

Simple, It will only fit in one hole as the bolt is bigger than the other ones

Hi Jamo, all the bolts are exactly...but one of them has a gold mark...I think that the 3B hasn't got any master bolt

Another question about the fidanza's flywheel, this

http://www.034motorsport.com/product...ducts_id=13849

What I need to fit the oem bearing?? an adapter, another big bearing ??




Thanks!

[Jamo]

No they are not, I have the same bolts installed on my car for a 3B flywheel, the gold marked bolt has a larger diameter shoulder on it and will only fit in one of the holes on the OEM flywheel and it will only screw into one hole of the flywheel.

It is impossible to screw it into the wrong hole

[nervas]

What I need to fit the oem bearing?? an adapter, another big bearing ??


Thanks!

yes, you need adapter

[Simons]

No they are not, I have the same bolts installed on my car for a 3B flywheel, the gold marked bolt has a larger diameter shoulder on it and will only fit in one of the holes on the OEM flywheel and it will only screw into one hole of the flywheel.

It is impossible to screw it into the wrong hole

OK Jamo!!

Tomorrow I will try

[Simons]

yes, you need adapter

I believe that I need these parts, for the pilot bearing, it's a standard OE part from a 7a engine/flywheel setup, PN: 034 105 276B, and two circlips PN: N 012 3031

It's correct?? with these parts is enought?? or I need something more

[Rocco]

hi Simon¡¡

what about the 7A gearbox conversion??

[Simons]

Hi friend!! not very well becouse I need some parts for the flywheel, and I don't know how many time need audi to send me the items...I hope to finish for this life