Clutch for ABY with chipped RS2 spec engine

[avants2turbo]

whats the options, and prices? what are others using?

[GazzaG60]

standard clutch

mines still holding up (unless its not standard but i think its original and standard.)

having said that mine comes on a lot later and low end torque kills clutch faster.

[Jamo]

Stock is going to slip with a fully chipped RS2 spec after a short period of time as it's a torque devil. SteveH has BTDT IIRC

Uprate to the Sachs or Southbend if your keeping the dual mass ( say away from Specs they are a POS ).

If you fancy something more exotic speak to Repo

[GazzaG60]

i got a sach motorsport plate and disc and a 7a flywheel to fit when i can be arsed

[martinjs]

Stock is going to slip with a fully chipped RS2 spec after a short period of time as it's a torque devil. SteveH has BTDT IIRC

Mine did aswell, but it had done 200k miles

[Jamo]

Mine did aswell, but it had done 200k miles

It would take me 20+ years to do that mileage!

[pixsaudisex2]

I was shocked how well a standard clutch lasted for so long in mine i killed it every day for four odd years and it only slipped every so often when giving it 7000rpm starts. although that sadly was only about 300bhp.

[pixsaudisex2]

It would take me 20+ years to do that mileage!

an about £ 2000000000 pheckin petrol prices..

[MidnightBlueS2]

Stock is going to slip with a fully chipped RS2 spec after a short period of time as it's a torque devil. SteveH has BTDT IIRC

Uprate to the Sachs or Southbend if your keeping the dual mass ( say away from Specs they are a POS ).

If you fancy something more exotic speak to Repo

Mine with stock Sachs never slipped with that kind of power but it's true I never did any high rpm launches