As per title, usual research thread, just looking at all options, not aware of these in the UK. It's for a 3B flywheel. I've been recommended sintered plate for better torque capacity, think that's the right way round...
-
Cheers'en, AndyC
1994 ABY Coupe - Projekt Alpinweiss -
That's the one I use will handle anything you'd plan to install Rusty, handles GT35r power easily as Prosty will testify too -
Indeed, we'll have been recommended by the same source for sure
Just looking at £££s as I think it'll be in direct competition with the south bend stage 4. Nice to have a choice.
Trying to identify best use of budget, this is a long-term item as opposed to the short term small hybrid option. A conundrum that's been played out in my head 1001 times
Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
Southbend is cheaper and easier to source, only could find the sachs clutch in europe not the U.K
Ask Terrybullwon where he got his, he's using one as a "run in" item.Comment
-
Ah, perhaps the opportunity of 'nice price'
Terry?
Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
Have anyone checked PPF in sweden www.pure-pf.com
Press.plate Sachs 707 = 370 GBP
4-6 pucked sinter = 130 GBP
I drove last season without any slurry at all. Pushed 620 Whp and 765 nm ..
Sachs has great clutches for sure !
Check link.
http://www.pure-pf.com/webshop/ppf_w...x.php?cPath=64Comment
-
i got mine through teppo kalske who is vems ascociated. hes a great guyComment
-
Prosty can also source you one. He got me mine.
S2 Coupe fully built.
10.9 1/4mile 0-100 in 3.5secs
Precision 6262 turbo
The Green MonsterComment
-
I have one, Friction plate from Repo and Mr Carsten got
my pressure plateChefComment
-
Is yours staying on the car Chef? Or is it, as mr. J Amo says, a run-in item? :mischeif:
Looking around the £500-550 delivered mark then? That's about what I thought. Will need to work out customs fees on the South Bend item. Still need to find out what my torque limit will be with the turbos I've got in mind for a final project, up to that I'll not be troubling anything the strong side of stock
Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
Comment