Flat shifter

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • jade
    S2Forum Extremist
    • Jan 2005
    • 1811
    • Home: New Zealand Current: Spain

    #1

    Flat shifter

    Anyone know or have options on this product

    RS 2 580HP
  • mcandmar
    S2Forum Zealot
    • Apr 2004
    • 5118
    • Country: Ireland

    #2
    I've seen systems like it, they usually work by cutting the ignition when the clutch is open. Dont know how you would get that working with an S2 ECU, doubt it would take too kindly to that. You could use the cruise control sensor on the clutch pedal to trigger it.

    I always wondered if the ECU gurus out there could make a switchable rev limiter. i.e. use the clutch pedal sensor and limit revs to say 5000rpms = redneck launch control.
    91CQ20v - Gone to a new home
    93UR-S4 - The Magic Carpet
    94S2Bus - The Emerald Express

    Comment

    • jade
      S2Forum Extremist
      • Jan 2005
      • 1811
      • Home: New Zealand Current: Spain

      #3
      Originally posted by mcandmar
      I've seen systems like it, they usually work by cutting the ignition when the clutch is open. Dont know how you would get that working with an S2 ECU, doubt it would take too kindly to that. You could use the cruise control sensor on the clutch pedal to trigger it.

      I always wondered if the ECU gurus out there could make a switchable rev limiter. i.e. use the clutch pedal sensor and limit revs to say 5000rpms = redneck launch control.
      It would be for a track car with standalone, just came across it their write up good and says problem free, but does it work with out destroying you gear box
      Last edited by jade; 1 August 2010, 18:52.
      RS 2 580HP

      Comment

      Working...