Tweet
What's the tightening torque for the rear diff mount bolt that attaches to the subframe? Guess it's quite high but can't find it in any of my manuals.
Ta
Ta
-
Cheers'en, AndyC
1994 ABY Coupe - Projekt Alpinweiss -
45Nm according to the big bookPaul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don't
-
OK, I managed to get somewhere near that on the ACME Torque-o-arm-o-meter while auditioning for contortionist of the year. Ta
Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
-
I hope your arm has been recently calibrated
Paul Nugent
Webmaster http://S2central.net
Administrator http://S2forum.com
1994 S2 Coupe ABY - aka Project Lazarus
2001 A6 allroad 2.5TDi - family tank
2003 S4 Avant 4.2 V8 - daily burble
Purveyor of HomeFries and Exclusive agent for Samco hose kits (S2/RS2)
There are only 10 kinds of people that understand binary - those that do, and those that don'tComment
-
I had to take into account the angle of dangle so the calibration might have been off...
On the plus side, no more loud clunking at the rear. That's been loose for quite some time!Cheers'en, AndyC
1994 ABY Coupe - Projekt AlpinweissComment
Comment