S2 and RS2 OEM Clutches - Same ?

[macspring]

Is the original clutch on an ABY S2 any different to an RS2 clutch ?

What's the part number for an RS2 clutch, if it is different to an S2 clutch ?

Thanks.

[saltinot]

David, the RS2 and the S2 (ABY) share the same clutch disc and pressure plate.

Cheers

[Ross]

Definitive answer from Tom there

Was going to say, in all my searching everything is listed for S2/RS2 including stock replacements. My stock clutch is stil holding out at 160k with 405ft/lb so they seem a pretty strong item! I have to brag - southbend St.2 Endurance is going in mine this summer

[macspring]

Thanks Tom and Ross,

That means I couldn't have done better when my S2 ABY had it's clutch replaced with a standard S2 ABY standard Sachs clutch. Would have been disappointed if the Sachs RS2 one was slightly better and I'd missed the obvious opportunity of a win win upgrade.

If going again in the future due to an upgraded engine, will be going for a suitable Southbend one also.

Thanks again.