Dual Mass Flywheel - NLA!!!

[europeanme]

well that has come as a bit of a shock...now what do i do....go single plate and live with the raw-ness....

any suggestions....

Mike

[WabTheKing]

well that has come as a bit of a shock...now what do i do....go single plate and live with the raw-ness....

any suggestions....

Mike

raww-ness? lol wouldnt imagine you'd notice any differance, also is this nla from audi?

have you tried sourcing an luk flywheel from an auto factor?

[europeanme]

raww-ness? lol wouldnt imagine you'd notice any differance, also is this nla from audi?

have you tried sourcing an luk flywheel from an auto factor?

it is NLA from Audi/TPS....

is there much difference from a LUK to a genuine version?..

after reading postings on here there has been references to vibration passing through the car with a SM as apposed to a DM flywheel....this has mainly been people who have changed from DM to SM....

[WabTheKing]

it is NLA from Audi/TPS....

is there much difference from a LUK to a genuine version?..

after reading postings on here there has been references to vibration passing through the car with a SM as apposed to a DM flywheel....this has mainly been people who have changed from DM to SM....

IIRC OEM unit is LUK anyway

as for the vibration, ive been in a few with SM but never noticed, i will make a point of looking for it next time i get one

[Jamo]

There is a difference between the two yes, you will notice the rawness and it's not as smooth, I want to go back to dual mass as southbend do a clutch that would hold power

[S2central.net]

not more unobtainium !

[turbo20v]

is it possible to use aan flywheel on aby/adu engine ?

[mcandmar]

Ask Pete in Quattrocorner as he supplied a dual mass flywheel to the previous owner of my car, as Wab says it would have been sourced directly from the manufacturer.

I drove a 3B the other day with a lightweight alloy flywheel and was so much nicer to drive, the dual mass makes the engine feel heavy and lazy IMO. Given the choice i would ditch the dual mass setup in a heatbeat.

[S2central.net]

is it possible to use aan flywheel on aby/adu engine ?

YES

[S2central.net]

Ask Pete in Quattrocorner as he supplied a dual mass flywheel to the previous owner of my car, as Wab says it would have been sourced directly from the manufacturer.

I drove a 3B the other day with a lightweight alloy flywheel and was so much nicer to drive, the dual mass makes the engine feel heavy and lazy IMO. Given the choice i would ditch the dual mass setup in a heatbeat.

Agreed they rev out more sweetly... the smoothness of DM is very nice of course but I also prefer the raw edge to the SMF cos the engine loves the weight loss.

[turbo20v]

YES

do you speak from experiences, because part nummbers are not the same

[S2central.net]

mmm - best get a 2nd opinion - always thought AAN/ABY/ADU items to be transferrable there - same crank, same block, same gearbox (01E)

[djh]

aan duel mass is thinner, with a 6 speed box you don't need the spacer, btdt

[turbo20v]

aan duel mass is thinner, with a 6 speed box you don't need the spacer, btdt

so it could be used on aby ?

[S2central.net]

well there you go then - every day a school day