Rear Diff Bush Assemblies

[willg54]

Hi all,

I'm just putting the diff back on to the rear subframe and a bit unsure of the correct assembly of the front (or side) bushes.

Im not sure which limit stops to be using...when i took it apart back in Feb, i think there was 1 of each but Kate says its only the ones on the right of the pic



from looking at kate and some pics on here, I currently have this on the left mount



and this on the right



could you tell me if this is right?

cheers

Will

[irishs2]

What you have looks correct to me. The metal one on the drivers side bottom, and the alloy one on the passenger side above the mount.

[s2_wot]

Wow, I was only going to post a similar question last night. The steel ones look like a bit of a bodge and I was wondering if I should get 2 x the aluminium ones. Thanks to both of you for clearing this up.

That said the steel ones still look like a bodge.

[willg54]

i was going to put 2 of the alloy ones on but they actually have a different depth to them. the original steel one had rusted alot on mine!

[Rikki Kitto]

Where did you get your limit stops from I need some of them?

[willg54]

went direct to audi, they aren't expensive dont worry!

£3.70 each to be precise!

[Rikki Kitto]

Wicked cheers for that