front Driveshafts

[nip]

On the Aby are the front driveshafts the same size? also can either be used on any side?
cheers nip

[gnutz2]

They're both different.

[nip]

They're both different.

******** thats why mine is making a dodgy noise cheers baz

[TimE-J]

Is it easy to spot the differences?

[nip]

Is it easy to spot the differences?

not to me it wasnt

[TimE-J]

Haha.. Before I strip mine I was just wondering if its easy to tell them apart but I'll just have to mark them.

[nip]

Haha.. Before I strip mine I was just wondering if its easy to tell them apart but I'll just have to mark them.

il swap mine over in the week if i get time, that will be the best idea mark them if there is any noticable differences il post a pic up for you

[TimE-J]

If you could that would be great!

[Trist28]

One is longer than the other by about 10-15mm, but as they are so close they can be fitted the wrong way and still work, until a full lock blip of the throttle I expect and CV pops off!! The output flanges on the box are slightly different offsets from the main box housing, its quite easy to spot when under there

On the Aby are the front driveshafts the same size? also can either be used on any side?
cheers nip

[nip]

One is longer than the other by about 10-15mm, but as they are so close they can be fitted the wrong way and still work, until a full lock blip of the throttle I expect and CV pops off!! The output flanges on the box are slightly different offsets from the main box housing, its quite easy to spot when under there

cheers trist il swap them over

[HORCH]

th next question will be, which side does the longest one go on

[nip]

th next question will be, which side does the longest one go on

na i know the drivers side had a new gaitor on :

[nip]

If you could that would be great!