does anyone drive around wit a siner cluch??

[zlobo]

Hi i am wondering how it is to drive with a sinter?

[Jeffer]

Yes, I daily drive my car with a sinter (mostly in traffic jams) and it isn't the easiest of clutches. Its one eager clutch, so sometimes it bumps while declutching because of the play in the driveline. So smoothe drive off's are difficult.
For another person using your car its very difficult for them te drive off. It will always stall!
Other then that, I think its a great clutch. Quattro starts are great with it.

So you have to compromise between power and souplesse. At least I have to.....

[zlobo]

ok.. i am thinking of replacing mine to a sinter.

[leo]

I drive sinter clutch from a half of year and... the main thing I've noticed that changed, is that I've rebuilding my transmission once a month... Yep... first it was the gear box, then the front differential, twice, then broken gear-wheel of 4th gear, combined with broken holdfast, then again after 3 days broken 2nd gear, and... that's it for now. So, be aware

(****, it's quite big list...:/ )

[zlobo]

hmm i shuld maybe stay with my stronger organic cluch then..

[Audi_CQ]

I'm using a tripple plate Sonic/Tilton clutch(http://www.tiltonracing.com/content....st2&id=32&m=d#) with cerametallic plates. Not the easiest clutch to use for everyday use. If I should have bought a clutch today I think I would have considered a carbon clutch even if they are expensive. They are much smoother to use. Something like this maybe: http://www.tiltonracing.com/content....ist2&id=43&m=d

Cheers,
Roger

[zlobo]

hmm that in going to be too expensive for me.

[leo]

I had a 4-plate clutch and it was too hard. I've changed for 8-plates clutch and it is a lot better. Maybe You, zlobo, should try 6 or 8 plate clutch.

[zlobo]

ok leo, where did you by the 8-plate? Was it sachs?? and what kind of kluch bering does you use (dont know if its cald cluch bering)

[leo]

I use a custom made complete clutch with harder springs and 8-plate clutch disc. It is made by Polish Tuner. I really like this clutch, however I cannot tell You technical details, but I can ask about Your upgrade if You like.

regards,
Leo

[zlobo]

if you wan you can ask about the price. for a 8-plate

[yoggi]

Jag har en 4-pucks sinter med förstärkt tryckplatta... funkar utmärkt! Visst det är lite elakare och svårare att växla mjukt men inga problem att köra ens i kötrafik! Pedalen känns som original även om dragläget knappt finnt kvar...

[zlobo]

ok så det är drag läget som är den stora skilnaden.. Kör du med fjädrande sinter eller stel? hur mycket efekt har du o vilken låda har du?

[yoggi]

ok så det är drag läget som är den stora skilnaden.. Kör du med fjädrande sinter eller stel? hur mycket efekt har du o vilken låda har du?

Precis! Jag kör med stel sinter... Chippad bara men mer effekt kommer Har den förstärkta 6-växlade lådan...

[robo]

Precis! Jag kör med stel sinter... Chippad bara men mer effekt kommer Har den förstärkta 6-växlade lådan...