Announcement

Collapse
No announcement yet.

Aby Front And Rear Hub Id Help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Aby Front And Rear Hub Id Help

    I,VE HAD MY CAR SUSPENSION IN BITS FOR TOO LONG WENT TO PUT IT TOGETHER TODAY BUT CANT REMEMBER WHICH ONE IS FRONT AND REAR.

    THE OD IS SMALLER ON THE HUB WITH THE LOWER BOSS WHICH I`LL ASSUME IS THE REAR.

    I`VE HAD THE NEW BEARINGS NOW FOR SOMETIME AND THEY WERE TOLD THEY WERE THE SAME FRONT AND REAR BUT THEY ARE`NT LOL

    SORRY FOR SHOUTING THE CAPS LOCK IS STUCK

    CHEERS JAMIE

  • #2



    from

    http://www.s2forum.com/forum/showthr...t=42772&page=3

    Rear bearings are smaller than front.


    I hope I am right lol
    Eric

    95 S2 Avant under rebuild.

    Comment


    • #3
      thanks for the reply all sorted now just recived the new rear bearings hope to have her back on all fours soon oow errr

      Comment


      • #4
        If you have a Coupe then front bearing is 82mm and rear is 75mm
        If you have Avant/Sendan then both front and rear bearings are 82mm.

        From the pic looks like the taller one is front (larger bearing) and the smaller one is rear.

        HTH
        www.quattro.ca
        B2: 82 Urq into Sport quattro, 82 4000 2-door, 83 80q 2 Door, 83 Ur-q CDN, 85 Ur-q Euro with 3B, 86 4kq, 59,000km
        B3/B4: 91 CQ, 93 90q 2.5TDI, 94 80q avant 2.5tdi, 94 S2 Avant

        Comment

        Working...
        X