uprated AAN clutch

[spink]

Is there anything available in the UK to fit the standard flywheel?needs to take upto 400bhp/550nm sort of levels

[Wrath]

Sachs pressure plate (754) and sachs organic clutch (526) maybe?

[dobbin]

clutch upgrade

ring pete at techniclutch on 0800 083 4142 ,
he is building me a clutch to my spec now for my rs2 , i have used him 3 times now for 1 off high performance clutches which no one else made for under £600, excellent quality
he can offer sachs plates or carbon\kevlar or paddle 3 or 5 finger options .
cheap as well my rs2 clutch £249. delivered

[Pembo]

Try helix at http://www.helix-autosport.com
Off the shelf. I have their pressure plate and a 5 paddle friction plate. Great performance all the way!

[andyg plym]

ring pete at techniclutch on 0800 083 4142 ,
he is building me a clutch to my spec now for my rs2 , i have used him 3 times now for 1 off high performance clutches which no one else made for under £600, excellent quality
he can offer sachs plates or carbon\kevlar or paddle 3 or 5 finger options .
cheap as well my rs2 clutch £249. delivered

fook me that is cheap....i need one to handle the same power as spink suggested.

Will this be what I need? IS this just for the friction plate? Or the whole lot?

[europeanme]

the sachs performance ones run on the same stock AAN flywheel you dropped off for me!...so you know it makes sense...

[Sleeper_Avant]

ring pete at techniclutch on 0800 083 4142 ,
he is building me a clutch to my spec now for my rs2 , i have used him 3 times now for 1 off high performance clutches which no one else made for under £600, excellent quality
he can offer sachs plates or carbon\kevlar or paddle 3 or 5 finger options .
cheap as well my rs2 clutch £249. delivered

NOT A CHANCE!!

i would not give them robbers a penny of anyones cash, EVER!

shocking parts, shocking quality and even worse customer relations after failures

well known in the ford circles, ive had 3 fail in 2wd cosworths personally, never ever give them any cash, EVER

[Rikki Kitto]

Don't go to them then Spink, car nearly ready by the way, hope to up over xmas will try pop in to you

[spink]

ok some contrasting views there then,its not for my car and the bloke has a limited budget so I dare the sachs stuff will be out of range.Will get some prices today

[spink]

the sachs performance ones run on the same stock AAN flywheel you dropped off for me!...so you know it makes sense...

are they about £600?

[spink]

Don't go to them then Spink, car nearly ready by the way, hope to up over xmas will try pop in to you

see you then

[Acidburn]

As above DON'T go to techniclutch i've heard nothing good about them, always ends up in failure and lost money.

http://passionford.com/forum/general...hniclutch.html
http://passionford.com/forum/general...clutch-ap.html
http://passionford.com/forum/general...hniclutch.html
http://passionford.com/forum/general...the-story.html
http://passionford.com/forum/general...periences.html
http://passionford.com/forum/ford-es...hniclutch.html

A quick five minute search on just one forum came up with 7 pages and 161 threads about this company - as above steer well clear, and then some extra just in case.

[europeanme]

are they about £600?

I suppose with shipping that could end up around that price....

[Greg_S]

I can recommend the SACHS clutch. I organised a group buy on these earlier in the year and ive had no issues or heard of any from others that purchased them.