AAN engine to 5 speed gearbox help

[Sleeper_Avant]

what flywheel and clutch can i use for AAN sensor pickups that will be used with a 5 speed 80 Quattro g/box?

standard ish power

cheers

[Acidburn]

whats currently fitted to your aan mate?

single or duel mass?

[Sleeper_Avant]

currently:
AAN shallow flywheel
shafted AAN clutch
NO spacer

did have a 2.5tdi 6 sp box but someone took it and left a shonkey old black 80 Q saloon lol

[Acidburn]

lol, same person who's literally just got in from going back for the calipers (btw nearly new pads on them)

Just bolt it up as if it was the 6 speed mate, aan's don't need the spacer

[Sleeper_Avant]

sweet, i know AAN`s didnt need spacer just wasnt sure about it being a 5sp.

which reminds me, next sunday, make yourself available......gearbox!

[rs200]

OEM s4 aan clutch set + 01a gearbox will fit 100%. I don't know for 016 gearbox.

I have some question.. what kind of clutch set use on aan with 01e?
but must be single mass flywheel.
7a? but which pressure plate and disk ?
must be plug n play !

[Nik0las]

no problem for the 01a 5sp box on AAN with standard power of course... I driven such configuration few years ago and the results for street car are very nice I would say due to short gears... However I would not recomend this if you go over 280hp and the standard setup...

[caterpillar]

016 tranny will fit too.. use the audi 100/200 flywheel and clutchkit...01a and 01e from any audi engine will fit...some detaljes does have to change , like the flanges to the propshafts, clutchkit, and linkage.. dont use the doublemass flywheel.. its crap..AND remember the ratio code for the quattroverson of tranny..

[Sleeper_Avant]

will find try to out codes,

all i know is it is from a 7a Quattro

rear diff ratio will be 4.1:1 hopefully

[Sleeper_Avant]

so the clutch,

is SACHS or LUK the better one?

anyone got any partnumbers?

im sure Audi wanted £117 exchange for both parts last year too!

cheers, Sean.