Tweet
My diff looking very nasty.So i want to blasted them,but i am not sure if its the right way.What everything must be covered?Every hole i cover with a bolt.I am not sure if outputs from diff must be covere too and input to diff,too.
-
Audi Coupe Quattro 2.3 20V -
You can blast it, but no matter how good the masking is it still gets in.
I used soda for the blast media and then You can wash it and it dissolves.
I still stripped the diff and cleaned it out after cleaning though. -
I think that,when i stripped diff of, i am not sure if i put together right
Audi Coupe Quattro 2.3 20VComment
-
Have you ever tried chemical cleaning?Comment
-
No,because i cant find anyone,who is near my town...Audi Coupe Quattro 2.3 20VComment
-
Comment
-
-
What did you use to clean that?Originally posted by filip.krticka View Postsigpic
1991 Audi S2 3B - 2.5 Stroker engine
1997 A6 2.5TDi quattro avant - C4
1976 RD250E / 350LC cafe racerComment
-
AndyP,
Their service was not cheap, but final effect is nice. I don’t know what exactly they use, some sort of chemical plus small plastic balls.Comment
Comment