ABY Clutch Master & Slave Cylinder Part Numbers ?

[macspring]

Would someone know the vag part numbers for the above two items ?

or ATE part numbers ?

And the respective prices from either dealer and / or from the likes of G&S ?

Thanks.

[Val]

master 8A0 721 401 (181 eur)
slave 4A0 721 261 (106 eur), ATE 03.2522-4300.3 (22,2mm, 121 eur)

Pricey

[Error404]

Master Cylidner is now NLA

[macspring]

Thanks for replies.

[macspring]

http://www.s2forum.com/forum/showthread.php?t=49102

This may be relevant to this thread.

[ash2050]

Make sure you check when you order an aftermarket part as the thread size on the non ABY push rod is 6mm.

You will need an 8mm for the ABY or it wont fit onto your clevis pin.

The other option is to change you clevis pin to an older style one with 6mm opening.

[Error404]

I wondered what the difference was from the old style to the ABY. The older ones seem higher quality and are more reedily available.
So a 3B/7A master cylinder should fit wholesale inc clevis into an ABY?

[ash2050]

I wondered what the difference was from the old style to the ABY. The older ones seem higher quality and are more reedily available.
So a 3B/7A master cylinder should fit wholesale inc clevis into an ABY?

The ABY one has got a little bush coupling on the push rod and is 8mm thread.

The 3b/7A has no coupling and the push rod is 6mm.

The couplings tend to fail on the ABY one and the push rod tends to bend on the 3b/7a type when the clutch is worn out.

The 3b/7a ones are still available from dealers and the ABY is NLA.

As long as the clevis pin is changed on the 3b/7a styles, it should fit.