Problem fitting 034 Short Throw Shifter

**andy10v** · 19 December 2013, 21:20

The JHM one?

If so yes, it has happened before, solutions of spacing up, or drill a new hole to move it up, and cut the bottom.

B3/B4 JHM short shifter issue- needing advice please

http://www.motorgeek.com/viewtopic.php?t=30849

I bought the JHM short shifter from 034 a little while back. When I tried to install it in my 1990 CQ I discovered that i had a clearance issue with the bottom of the shift lever and the prop-shaft coming out of the trans. The shifter will only install in the tallest (least amount of...

**gripper** · 19 December 2013, 21:44

How much are these now ? Inc the dreaded postage to England ?

**Mcstiff** · 19 December 2013, 23:33

Another possible solution would be a spacer below the shifter if you really want the shortest throw (I find the longest, shortest, throw acceptable).

**mrtat2k9** · 20 December 2013, 07:14

Hi thanks for you replys yes uts the jhm one. I thought I would be able to lift the shifter up but just wasnt sure if it would affect any thing else.
Cant remember how much mine cost has I brought it in the summer the the dollar was week to the pound.

Problem fitting 034 Short Throw Shifter

Problem fitting 034 Short Throw Shifter

Comment

Comment

Comment

Comment