240mm clutch cover cad drawing

**Sleeper_Avant** · 22 January 2014, 19:48

Sam,

Golf ABF flywheel no good for you?

**sam80quattro** · 22 January 2014, 19:52

unfortunately not mate 228mm clutch on those too. i may know a lad after 1 though if you have a spare??

**Sleeper_Avant** · 22 January 2014, 21:02

ah right, must have been 230mm, will ask him tomorrow

Sachs VR6 clutches take 500nm (in his Tdi anyway, and others proven)

no good for you mate?

**sam80quattro** · 22 January 2014, 21:06

i tried a vr6 paddle clutch on my flywheel and it didnt fit??? im assuming there different offset with been transverse/longitudinal??

**sam80quattro** · 22 January 2014, 21:15

i have 2x smf 228mm flywheels off 80's anyway mate but pretty sure the longitudinal flywheels don't fit transverse and vice versa

**sam80quattro** · 22 January 2014, 21:24

ahh that was it, vr6 friction plate doesn't fit onto the splines of the audi gearbox

**afterburner** · 23 January 2014, 10:56

You need a 3B pressure plate, right? Because the 3B comes with a solid flywheel, not dual-mass, just like the 4 cylinder one you have.

**sam80quattro** · 23 January 2014, 11:53

I have a clutch already I was just after a drawing with dimensions on to get it spot on for redrilling the flywheel.

Comment