Torx bit size for rear differential mount bracket.

[Canadian RS2]

Anyone know the size of the torx bit that is needed to remove the bracket that holds the rear diff mount on the RS2? Biggest I had was a T40 but it was too small.

Thanks
Dave

[UrS4boy]

Anyone know the size of the torx bit that is needed to remove the bracket that holds the rear diff mount on the RS2? Biggest I had was a T40 but it was too small. Thanks Dave

Hmm.... my good friend Kate says "allen key head bolt (combi) M10 x 45 Z1" (not sure what Z1 means), PN N 90285102.

[Canadian RS2]

Hey Dave,

The bolts for the actual diff mount are a hex bolt but the bracket that holds the mount has bolts that use a torx head. Is that part you gave me for the mount or the bracket?

Dave

[andy10v]

Which bolts?

[UrS4boy]

Hey Dave, The bolts for the actual diff mount are a hex bolt but the bracket that holds the mount has bolts that use a torx head. Is that part you gave me for the mount or the bracket? Dave

The PN I found was for the Item 10 bolts in the diagram Andy P posted:

[Canadian RS2]

The PN I found was for the Item 10 bolts in the diagram Andy P posted:

The bolts I'm trying to sort out are No's 4 & 15. 10 and 12 are defintely Hex bolts. 4 and 15 are Torx.

Dave

[UrS4boy]

The bolts I'm trying to sort out are No's 4 & 15. 10 and 12 are defintely Hex bolts. 4 and 15 are Torx. Dave

My good friend Kate, to whom I once introduced you to at "party", says that No. 4 is a "bolt, hex head, with pin, M12 x 15. x 118", PN N 90524301. She also tells me that No. 15 is an "allen key head bolt (combi), EM8 x 52-V", PN N 90530601.

Sorry. I am not finding what you want, just what she tells me. Hopefully, some an RS2 owner will chime in soon.

[Canadian RS2]

Anyone know the size of the torx bit that is needed to remove the bracket that holds the rear diff mount on the RS2? Biggest I had was a T40 but it was too small.

Thanks
Dave

Looks like I answered my own question. The bolt requires a T45 Torx bit.