The plastic flexey pipe of the side of the clutch master cylinder developed a crack,and filled my foot well with fluid. Is the master cylinder unique to the s6 or is it same as any other audi. Is it a difficult job to do.
-
-
Clutch PNs, options and clutch master cylinder R&R info
There are different PNs for RHD and LHD (see below) otherwise, not specific to C4 UrS cars. Crosses to C3 (Type 44) and V8s as well.
Not a fun job because you have to lie in the footwell on your back (astronaut style). Best if you remove the driver's seat first (makes life easier in the end).
Link to more info, including a DIY: http://forums.quattroworld.com/s4s6/msgs/24719.phtml
RS2'd 93 UrS4 5 spd sedan
94 UrS4 V8 6 spd manual avant -
Sorry i can't help you on your Master cylinder issue hope you get it sorted and will keep an eye on this as a good learning curve.Good luck!
Now i know you have a URS6 why not put up some pictures of your pride and joy on my thread.
Cheers.
96 URS6 plus speck saloon
96 URS6 plus speck estate
94 2.6 80 Avant
99 2.8 final edition CabrioletComment
Comment