What's available over and above the usual rubber Febi / Meyle / VAG items?
Announcement
Collapse
No announcement yet.
Gearbox Mounts
Collapse
X
-
These recently appeared on ebay:
http://www.ebay.co.uk/itm/Polyuretha...item27e76decec
Messaged the seller about them and received this reply:
"They are made by company in Poland. They are new on the market but good enough to attract koraszewski auto sport ( Google it). "
So left it at that, would be interested to know more about them though.
Comment
-
I run 034 street density. Nothing to complain about, nice and firm.Audi S2 -1994 | 480 Hp 650 Nm | FlexFuel | MaxxECU | 3" Stainless | Porsche GT3 Front Brakes
http://www.garaget.org/?car=52877
Comment
-
I think i'm in need of some new mounts now... Having driven the car for the first time in a while over the weekend the only thing that's letting her down now is the amount of general movement there is from the transmission when pulling away in first. I've not changed of my engine, snub, or gearbox mounts and wondered if it's worth doing the diff mount at the same time? I would like something slightly stiffer than standard so am interested in Porsche engine mount suggestion. I'll have a look on Motorgeek and see if I can find the link. Other than the Porsche ones, what else is available that isn't too track focused? I had ally mounts and poly on my previous car and it was too much for road use so looking for something that's good quality and going to firm things up nicely.Old Stuff Reborn.
Comment
-
Panthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 Avant
Comment
-
Originally posted by andy10v View PostPeople on motorgeek have been using stock Porsche engine mounts as uprated rubber gearbox mounts.96 URS6 plus speck saloon
96 URS6 plus speck estate
94 2.6 80 Avant
99 2.8 final edition Cabriolet
Comment
-
Originally posted by Vorsprung durch Technik View PostHow does this work then? Any modifications needed or are they a direct fit?
I will let you know.
A "google" for 911 engine mounts, and they dont look a million miles away.
Rennline do solid billet ones, and there are poly ones as well, but I would have thought that rubber engine mounts would make quite a nice stiff but not silly gearbox/diff mount.Current-2004 Impreza PPP wagon
Sold-92 3B coupe-RS2+, 996s, konis, rear torsen, forged rods........
Sold ABY-stock
Comment
-
Comment