which hubs are same as s2

[GazzaG60]

Hi guys

it appears I have a bent hub.

anybody know which hubs are the same as s2.

ie is the v6 the same as the bearing is the same.

I presume the 16v ones are smaller as the bearing is smaller.

I have the wheel carrier part its fine. the bit that bolts to the shock is bent.

can these be straightened even

many thanks

[quattrostyle]

This is quite confusing if you ask me.

The carrier is the part that holds the bearing and the hub. The hub is the part the brake disc and wheel bolts to.

I'm guessing the cast part so the carrier is bent. This should be the same as V6 and 2.3 20V coupe carriers.

[_ShurikeN]

There is no 100% the same hub. The detail would share the partnumber with smth else if it would.

V6 hub is "the same" except bolt pattern and hub surface diameter.

[GazzaG60]

thanks. you worked me out.

yes cast is bent.

cheers

[_ShurikeN]

Cast hub carrier should be the same as any 82mm bearing (V6) audi 80/Coupe one. I believe they are all with M14 bolts holes.

[GazzaG60]

what do you mean by hub surface diameter

I have the s2 carrier and its fine

[_ShurikeN]

I mean the outer diameter of the hub:



And i believe we are mixing 'hub' and 'hub carrier'.

[GazzaG60]

I got you. cheers for the help guys. ordered a second hand v6 one.

looks like my old s2 accident caused more damage than first noticed. im getting there with the saloon conversion though.

[sidrick]

Hi guys

it appears I have a bent hub.

anybody know which hubs are the same as s2.

ie is the v6 the same as the bearing is the same.

I presume the 16v ones are smaller as the bearing is smaller.

I have the wheel carrier part its fine. the bit that bolts to the shock is bent.

can these be straightened even

many thanks

As said, you're getting these mixed up.

The bearing CARRIER is the part that the shock bolts to.
The HUB is the part that pushes into the bearing and you then bolt the wheels to.

The information you need was here, assuming he is correct: 'Cast hub carrier should be the same as any 82mm bearing (V6) audi 80/Coupe one. I believe they are all with M14 bolts holes. '

Edit: I was distracted for 5 minutes while posting

[GazzaG60]

that's correct . my mix-up

cheers guys