S2 ABY avant rear propshaft joint

[andy j]

I checked my propshaft today to find out what was knocking on it. The rear joint on to the diff is knackered. I went to some local motor factors and they couldn't get me one. Had a look on ebay and google but can't seem to find much about them. Can anyone tell me where i can find one or do i need to find an equivalent one from another car?
Any help would be greatly appreciated!

[andy10v]

Part numbers in here

http://www.s2forum.com/forum/showthread.php?t=62448&highlight=propshaft

Its on lots of things, you can get a ford one on ebay for about £20.

[Ryss]

Took mine to a cv specialist. He took one look at it and supplied a cv used in a Ford split diff application as referred to in the above link.

[andy j]

Ok, thanks. Will see if I can get one using that porsche part number. Any idea what fords I would find the joint on?

[bertman]

I was looking into this as well.I think the joints are off a ford scorpio.
I now wait to be corrected

[_ShurikeN]

I was looking into this as well.I think the joints are off a ford scorpio.
I now wait to be corrected

I think It must be true. I replaced mine with one from Ford Granada MkII.

[andy j]

had a look on ebay and found these:

http://www.ebay.co.uk/itm/MAPCO-CV-J...ht_16080wt_986

http://www.ebay.co.uk/itm/FORD-SCORP...ht_1931wt_1015

http://www.ebay.co.uk/itm/Ford-Sierr...item5d50b924f6

the outer diameter won't be far off 100mm. I will go see on my lunchbreak if i can get one locally.

[saltinot]

I'm a little late to the game but.....

http://www.s2forum.com/forum/showpost.php?p=807245&postcount=1196

There is a pic of the part number on the GKN box.

[andy j]

Thanks anyway. I couldn't get one locally so ordered the top one of ebay! Should be ok!

[audisimba]

Can someone tell me if the gearbox side propshaft CV is same as the rear diff side one ?

[saltinot]

They are the same joint on both ends.

[s2driveruk]

Tom...where did you source the boots for each end from and do you have a part number? Aiming to do mine during the spring to reduce the clank and slack I have on mine.