Best clutch/flywheel for rs2 aan set up?

[roysterFR]

I am currently almost completed upgrading my s4 1993 aan to rs2 spec looking to get around 350bhp, have Wagner evo exhaust, rs2 turbo etc. Does anyone recommend a particular set up for example 7a flywheel with sachs clutch if so could you please tell me part numbers as I'm not sure what exactly is best. Any advice much appreciated

[UrS4boy]

I am currently almost completed upgrading my s4 1993 aan to rs2 spec looking to get around 350bhp, have Wagner evo exhaust, rs2 turbo etc. Does anyone recommend a particular set up for example 7a flywheel with sachs clutch if so could you please tell me part numbers as I'm not sure what exactly is best. Any advice much appreciated

Just so you know, upgrading is not necessary with an RS2'd AAN engine, provided that your existing clutch and dual mass flywheel are in good shape. I've been RS2'd since 2004 and run stock dual mass flywheel and OE LUK clutch.

That said people do go to single mass flywheels and Southbend clutches. Contact Marc at EFI Express for more info.

[roysterFR]

Just so you know, upgrading is not necessary with an RS2'd AAN engine, provided that your existing clutch and dual mass flywheel are in good shape. I've been RS2'd since 2004 and run stock dual mass flywheel and OE LUK clutch.

That said people do go to single mass flywheels and Southbend clutches. Contact Marc at EFI Express for more info.

Thank you was not sure if standard clutch would handle 350bhp however as my dual mass is not great was thinking on single route. I have read some not so great things about southbend clutches? If I go 7a do I then use 3b engine clutch set?

[Greg_S]

I changed to a single mass and Sachs race clutch which I am pleased with, with the Sachs race clutch it's not quite as refined pulling away but if you opt of the non race spec this wouldn't be an issue

[roysterFR]

I changed to a single mass and Sachs race clutch which I am pleased with, with the Sachs race clutch it's not quite as refined pulling away but if you opt of the non race spec this wouldn't be an issue

Thank you that sounds just what I was looking for, do you know what Sachs kit I would need or mainly does it need 3b race kit to fit 7a? Thanks

[andy10v]

3B SRE clutch for 7A/3B flywheel

http://www.sachsperformance.com/Sach...2_3_73_97.html

The SRE release bearing is just a plastic faced one, Helix do a metal one.

[roysterFR]

3B SRE clutch for 7A/3B flywheel

http://www.sachsperformance.com/Sach...2_3_73_97.html

The SRE release bearing is just a plastic faced one, Helix do a metal one.

Perfect thank you, last question does anyone know best place to get one if any in uk?

[Greg_S]

Your best bet is to order online for delivery from link above, I'm not sure of UK suppliers, I organised a group buy a few years back which got a modest discount but needed an order of 10 to one address for them to do it

[GazzaG60]

wow price nearly doubled since i got mine.....been in the cupboard for 5 years or so though