Does FTF Gearbox fit a s2

[Turbo_Bert]

Hallo Guys,

as the title says, does a FTF 6 speed Diesel gearbox from the Audi A4/6 or VW Passat fit a audi s2?
Its a 01E Gearbox like the DSY form the B5 S4 who works in some S2 that I know.
The Chassis is a 3b coupe but the mounts and gearbox lever I would take from a ABY 6 Speed Coupe.

[diesel des]

Think this will be the wrong final drive ratio?

[popdemonic]

'97-'00 01E specs

http://workshop-manuals.com/audi/a4_mk1/power_transmission/6-speed_manual_gearbox_01e_four-wheel_drive/technical_data/gearbox_identification/code_letters_assignment_of_mechanical_units_transmission_ratios_capacities/

[Turbo_Bert]

Thanks for support.
So the question is, if the 130 mm triple roller drive shaft hubs of the FTF gearbox could be replaced by the 108 mm Hubs from the ARV gearbox.
Can anyone tell me if the plug in gearing of the 01A and 01E gearboxes, especially the ARV / FTF is the same?

[_ShurikeN]

So the question is, if the 130 mm triple roller drive shaft hubs of the FTF gearbox could be replaced by the 108 mm Hubs from the ARV gearbox.

No. You will need 01E-transmission 108-mm flange (for instance, from CBL or CGR). Flange from ARV (01A transmission) will very likely not fit.
01E flanges are attached with a bolt despite 01A ones.

[Turbo_Bert]

OK, I understand.
Does the triple roller drive shaft from the Audi 80 B4/Coupe 2WD with V6 Engine fit at the original FTF Gearbox Flange?