good clutch for 500HP?

[popdemonic]

I have a southbend stage 3+ clutch and recently i have a clutch dragging issue.
i have replaced everything except the clutch set.i'm thinking i might have a pressure
plate problem.what's the new clutch for my UrS6 stock dual mass flywheel?
i'm leaning toward Sachs SRE but don't know what's the right part#.Which one
should i get between Performance or Racing series?Thanks.
pop

[Ficksy Heart]

if you use a 7A or 3B flywheel you can use a Sachs Race Engineering 883082999707 pressure plate and a 881864000685 sinter clutchdisk. thats the stup of my S4.

you can also use the 881861999802 organic cluthdisk but it's not so strong like the 685 disk.

i would'nt use the original dualmass flywheel. it holds the original power but not more.

[diesel des]

Warning. The Sachs race engineering sintered clutch is very aggressive. It holds my 700nm torque ok but it makes the car not so nice to drive.

[popdemonic]

Where to get those Sachs clutch for a good price?i'm going to get one now.

[Ficksy Heart]

Warning. The Sachs race engineering sintered clutch is very aggressive. It holds my 700nm torque ok but it makes the car not so nice to drive.

i thought so too but at the first test drives i find it really comfortable. for me its absolutely suitable for everyday use.

in my S3 2.8 24V Turbo i had a Spec sinter clutch, that was horrible

[SteveH]

i thought so too but at the first test drives i find it really comfortable. for me its absolutely suitable for everyday use.

in my S3 2.8 24V Turbo i had a Spec sinter clutch, that was horrible

I would agree. It's certainly heavy on your left foot and can be aggressive if you lift the peddle quickly, however once you're used to the feel, it can be used for a daily driver.

[diesel des]

I don't find it heavy at all its just how on/off it is and how when trying to move away smoothly the car shudders sometimes.

I am talking about the Sachs race engineering sintered 4 puck paddle clutch setup. It really destroys the town driving of my urs4.

[SteveH]

Yeah, I have the 4-puck sintered friction plate. It's a lot heavier than my old Clutchnet clutch. I can slip it in traffic to reduce the on/off bite, however it does make a bit of a screech sometimes when I pull off. I wouldn't recommend it for frequent town driving. It's worth fitting one of these just to see the MOT tester stall the car multiple times when trying to get the car in and out of the garage

[popdemonic]

Let me explain how i use my car on DD so you can narrow down the choices.
I drive this car mostly around town,stop n go.I do occasionally drive outbound
With moderate traffic.The major concern is not how much torque/hp the clutch
Could handle with but it would be great with light pedal effort if possible.
The reason i need the new clutch is also i think i have problem with southbend
Pressure plate and caused my clutch did not fully disnegaged.i'm going to rule
This thing out by getting new set of reliably quality clutch.I dont want to pay
Money taking some risky on the clutch again that's why i'm leaning toward Sachs but
Didn't where to get the correct combo between clutch disc and pressure plate.

[quattro-nick]

i have AAN engine and use 3b flywheel with sachs sport clutch and organic disk.it woud be enough for 540 nm but i have 520hp and 635nm torque and it hold for now but i never abuse my car

you have always a heavy clutch pedal with a sport clutch,i solved this with a small vacuum booster on the clutch pedal

http://www.s2forum.com/forum/showthread.php?t=73795&highlight=solution+heavy+clutch+pedal

[popdemonic]

Nick where did you get those clutch from?

[quattro-nick]

on german ebay,lots off audi stuff there
this is what i have

http://www.ebay.de/itm/Kupplung-Spor...item33a5efee52

are u can choose an other disc like this but not pleasant for daily driver

http://www.ebay.de/itm/AUDI-S2-RS2-2...item463e167d2b

see the right picture

[popdemonic]

Thanks Nick!

[popdemonic]

it seems like this one is for Single mass flywheel right?


http://www.ebay.de/itm/Kupplung-Spor...item33a5efee52

[quattro-nick]

yes,3b flywheel is single mass flywheel,better than dual for high power
did you buy the clutch because the clutch from the link is sold now