Audi rs2 shifter linkage bushing

[Jiri]

Hello guys,
Now that my gearbox is rebuild i found a problem in the shifting linkage. The nylon bushing is missing and there is no part number on etka. I saw in another topic that 034 kit is not as good as i should be. Has anyone a solution to fix this? Another rebuild kit maybe?

Or maybe someone has the dimensions and i can get a copper bushing.

[Filip_FIN]

Hello,

Is it this part you are looking for ?http://www.s2forum.com/forum/showthr...=Nylon+printed

[Jiri]

Thanks but its the other bushing that Goes over the ball.

[sailaz]

I assume you need this one
https://store.034motorsport.com/shif...e-6-speed.html
but ...

http://www.s2forum.com/forum/showthread.php?t=75518

[Jiri]

indeed thats what i mean.
i prefer a nylon solution so i can kept the original parts.
is it not possible that audi used the same bushing in other linkage system?

[mike74]

Good luck finding a solution. I looked for ages but eventually gave up and bought a standard part to replace my worn bit. I think those parts are getting pretty thin on the ground now so might be tricky tracking one down, good luck though!

[Jiri]

Good luck finding a solution. I looked for ages but eventually gave up and bought a standard part to replace my worn bit. I think those parts are getting pretty thin on the ground now so might be tricky tracking one down, good luck though!

you never know

i know in an old topic there was someone who has taking the measure of it and i think it was 2.5mm but not sure