Audi RS2 driveshafts details

[ThatGUY]

Need help identifying RS2 drive shafts

What are the part numbers for the front and rears?

What diameter are the shafts?

What diameter are the CV's?

Are the outer CV's larger than the S2?

Are the outer CV diameters the same front and rear?


The part number I have is 8A0501203G.


I have searched all over and haven't been able to get a good answer.

Many thanks,
Andrew

[blux]

Andrew,


original fron drive shaft number: 8A0407271AC left front
8A0407272AC right front

audi exchange numbers: 8A0407451GX left front
8A0407452GX right front

gearbox side is 108mm flange
used on 3B,ABY and ADU engined cars. also 90 20v sport. (did not check yet on mine)

rear ones are LEft and right the same: 8A0501203L or exchange partnumber: 8A0501203LX
this one on ABY and ADU for sure. not sure about the other model. also 108mm inner flange.

But the ones you have are real RS2

[_ShurikeN]

No diameter but lengths here:
http://www.s2forum.com/forum/showthread.php?p=892924

I could measure, but not sure that diameter matters. They are indentified by splines numbers for me.

CV sizes can be found by partnumbers from catalog.

Front and rear outer CVs are different.

[ThatGUY]

Thanks guys.

I couldn't find the information; and thought it would benefit me and others if it was located in a thread with a decent title.

[Fat Audi 80]

Thread stuck...