hello
i was planning on upgrading to an 01e from an coupe quattro 01a onto a 1.8t thats going into my b2, i appreciate this is a s2 forum but have more luck finding knowledgeable people here so worth a shot.
i have read that some people have clutch engaging/disengaging problems and seems to be down to the stack height.
so this is where im lost people are using 240mm larger flywheels, could i not just stick with the 228 clutch and flywheel and upgrade the clutch and pressure plate to hold more power there seem to be lots of options for s3's and only need to told 450 ish.
the other one is i have seen a dqt gearbox but it has the wrong driveshaft cups any idea where i can get 108mm ones and swap them over or not bother and get the right box to start with
cheers
i was planning on upgrading to an 01e from an coupe quattro 01a onto a 1.8t thats going into my b2, i appreciate this is a s2 forum but have more luck finding knowledgeable people here so worth a shot.
i have read that some people have clutch engaging/disengaging problems and seems to be down to the stack height.
so this is where im lost people are using 240mm larger flywheels, could i not just stick with the 228 clutch and flywheel and upgrade the clutch and pressure plate to hold more power there seem to be lots of options for s3's and only need to told 450 ish.
the other one is i have seen a dqt gearbox but it has the wrong driveshaft cups any idea where i can get 108mm ones and swap them over or not bother and get the right box to start with
cheers
Comment