Announcement

Collapse
No announcement yet.

New 17" S4 Wheels on spacers needed ?

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    New 17" S4 Wheels on spacers needed ?

    What spacers do i need for theese.
    17" 7,5" Wide ET45

    Standard ET is 35 on the s2 ?

    What spacers do i Need to make them look good and not toutch the steering joint?

    10mm or 15mm ?

    The Car has Yellow konis and lowered whith H&R Springs

    How They look Now

    Best Regards
    Attached Files
    sigpic
    Audi S2 Coupe - 92
    Koni + H&R. PowerFlex bushes. 3" Exhaust
    RS2 IC. RS2 TURBO. RS2 EX MAINFOLD
    Best ET 2006 13.8 @ 157 Km/h (Stock turbo and EX mainfold)
    Best ET 2007 12.78 402m, 0-62mph: 4.2 sec, Speed: 175 km/h (GTEC)(1.1bar)
    Best ET 2007 201m 8.15@140km/h
    Best ET 2008 402m 12.34@177km/h
    My Project
    http://www.s2forum.com/forum/showthread.php?t=16997
    Tags: None
  • #2
    Mine has 18" with et30 (was 45 without spacers) with konis and lowered and it doesn't catch. They do sit nicely in the arch aswell

    Mark

    Race Clio RS197

    S2 Coupe ABY (Green) - RIP
    S2 Coupe ABY (Blue) - Sold

    Comment

    • #3
      Originally posted by Eriksson
      What spacers do i need for theese.
      17" 7,5" Wide ET45

      Standard ET is 35 on the s2 ?

      What spacers do i Need to make them look good and not toutch the steering joint?

      10mm or 15mm ?

      The Car has Yellow konis and lowered whith H&R Springs

      How They look Now

      Best Regards
      10mm will do fine mate.

      Comment

      • #4
        Okey.

        But i want them to sit like rotoryboys.

        So can i use 15mm Spaers whitout any strange things happening.

        http://www.garaget.org/?car=7966

        more pictures
        sigpic
        Audi S2 Coupe - 92
        Koni + H&R. PowerFlex bushes. 3" Exhaust
        RS2 IC. RS2 TURBO. RS2 EX MAINFOLD
        Best ET 2006 13.8 @ 157 Km/h (Stock turbo and EX mainfold)
        Best ET 2007 12.78 402m, 0-62mph: 4.2 sec, Speed: 175 km/h (GTEC)(1.1bar)
        Best ET 2007 201m 8.15@140km/h
        Best ET 2008 402m 12.34@177km/h
        My Project
        http://www.s2forum.com/forum/showthread.php?t=16997

        Comment

        • #5
          @ Rotorboy. How much have you lowered the car? I have a CQ20 that looks like a 4x4 on 18's. I think the S2 sat 20mm lower originally than the CQ20 (correct me if I'm wrong) so should I go for 35-40mm lowering???????
          Dark Grey Avant
          RS2 FARB
          Powerflex Front wishbone bushes
          Alloy Subframe Bushes

          Comment

          • #6
            Originally posted by Azman
            @ Rotorboy. How much have you lowered the car????
            Mine is about 30mm so i would suggest about 40mm for you to be close-ish. I suppose you could go 60mm but be carefull, armo had his slammed and it didn't look or handle great.
            Mark

            Race Clio RS197

            S2 Coupe ABY (Green) - RIP
            S2 Coupe ABY (Blue) - Sold

            Comment

            • #7
              Where can i get spacers 12mm or 15mm ?

              Best Regards
              sigpic
              Audi S2 Coupe - 92
              Koni + H&R. PowerFlex bushes. 3" Exhaust
              RS2 IC. RS2 TURBO. RS2 EX MAINFOLD
              Best ET 2006 13.8 @ 157 Km/h (Stock turbo and EX mainfold)
              Best ET 2007 12.78 402m, 0-62mph: 4.2 sec, Speed: 175 km/h (GTEC)(1.1bar)
              Best ET 2007 201m 8.15@140km/h
              Best ET 2008 402m 12.34@177km/h
              My Project
              http://www.s2forum.com/forum/showthread.php?t=16997

              Comment

              • #8
                Originally posted by Eriksson
                Where can i get spacers 12mm or 15mm ?

                Best Regards
                The scummers Demon Tweeks sell them or PRI

                http://www.priracing.co.uk/product.p...aceaf99584346a

                Comment

                • #9
                  Or for H&R

                  http://www.performancealloys.com/all...el_spacers.asp

                  Comment

                  • #10
                    I got mine from A C Services on 01278 663699

                    cost me about £60 for all 4 delivered
                    Mark

                    Race Clio RS197

                    S2 Coupe ABY (Green) - RIP
                    S2 Coupe ABY (Blue) - Sold

                    Comment

                    • #11
                      Is it possible/safe to have these custom made ? A good friend of mine will make me almost anything with his lathe... and for almost nothing as well
                      Midnight Blue S2 - SOLD - 1993 S2 Avant

                      Comment

                      • #12
                        AC Services.
                        I get my Silkolene products from them too. Though they seem to think I own a Scooby.
                        SS

                        Comment

                        Previous template Next
                        Working...
                        X

                        We process personal data about users of our site, through the use of cookies and other technologies, to deliver our services, personalize advertising, and to analyze site activity. We may share certain information about our users with our advertising and analytics partners. For additional details, refer to our Privacy Policy.

                        By clicking "I AGREE" below, you agree to our Privacy Policy and our personal data processing and cookie practices as described therein. You also acknowledge that this forum may be hosted outside your country and you consent to the collection, storage, and processing of your data in the country where this forum is hosted.

                        I Agree