suspension

[butchers2]

Hello every one
Need your help had my car lowered not so long ago but the front sits a fair bit lower than the back i have koni shocks and spax springs.
Any help would be good.

thanks
liam

[s2_bo]

are you using matching top mounts all round?

[butchers2]

pic my s2 015.jpg

[s2_bo]

Wow that is a big difference are you sure all the springs are from a matching set? Looks like the front is lowered and the back is stock...

[S2central.net]

Didn't think Spax had anything for B3 quattro (incl S2) - are you sure thats a proper kit ? Maybe it was long since deleted...

[s2driveruk]

front and rear springs mixed up?

[butchers2]

Not sure on that one will find out.
would it make that much difference not sure you can see that good in the pic
but its got to be a good inch and a half.

[butchers2]

Had a look on spax web site there is no springs for the s2 listed so looks like i got stiched up
well aint gonna keep it like that its not that good a ride any way
what would you peps say was a good spring to go with.

thanks liam

[BRY]

H&r

[Rusty]

It certainly is noticeable in the pic

Front and rears mixed up would be my guess, the rears are a bit shorter than the fronts.

[butchers2]

could be dont think the garage where i had them done is all that really.
but does any body know if spax do a set of springs for an s2 like i said cant see it listed.but that is the web site

[Rusty]

Take a wheel off, have a loot for a set of manufacturer markings or part number, post them up. Only take 5 minutes. Better still take some clear pics of what's going on.

[Acidburn]

whats the car handle like atm?

[butchers2]

i will try and take pic and have a look tomorrow for the part number.
it dont handle that good bit rolly in corners and very harsh over bumps.
cheers liam

[Acidburn]

Hopefully its something easy like front <-> rear swap.