Hallo,friends!

[yavor20v]

Hi everybody!
My name is Yavor and i'm from Sofia,Bulgaria.
I've been reading this forum for a while and now i've seen this threat!
It's interesting to me to see more fans of S2 and i'll try to hepl anybody who has any problem,which i've solved!
Now i'm on my way to transplant a new motor on my 1990 audi Coupe quattro 2.0 20V
The new motor is 94' AAN 2.2T
When i'm done ,i'll post some pics

[s2_bo]

Good luck with your project!

Look forward to seeing the pics.

Cheers.

[20vQC]

Hi Yavor! welcome to the forum! Well I got the same 2.0-20V coupe quattro... but the new AAN is ready to fire up! Just waiting a new hall sensor and the 5 Fiat coils to get the VEMS firing all 5 pots!

[yavor20v]

I,m having a troubles with intake mainfold,what would you do??

[couperman]

I was in the same boat. I bought a 3B intake manifold and it didn't clear the valve cover. An ABY Intake works fine as well as an RS2 intake if you're planning on running the inlet pipe around the passenger side of the engine..

Are you keeping your A/C?

[yavor20v]

Ooo,of course i'm keeping it! It was a mechanic A/C and i changed it with electrical from one other coupe!
I'm thinking to run the pipe above the hydraulic pump and make a revert mainfold,but the problem is that here we don't have many of 3B or ABY mainfolds here in BG...
Somehaw and someway we're gonna make it!
I'm going to work now,have some teeth to extract and that the fun starts!
Have nice weekend ,friends!

[20vQC]

AC eliminated, reason: no space for the AC radiator. I'll resolve that with two litle radiators mounted on the front sides. I kept my intake manifold , just is a little difficult to place the water radiator, I used a Fiat Ducato single fan cooler that is a lot thinnner thatn the OEM one. Put the radiator with an angle of 45 degrees (the front of the rad looking to the center of the car and you're done. I'll take some photos on tuesday to give you some help. I could tell ya that is possible to do it... obviously is better to use the ABY,ADU, 3B, RR intake manifold but I could not afford the price so I had to resolve my problem doing some other things... CHEERS GUYS! take a look to my "NM to AAN" thread!

Fabio G.