a belgium coupe quattro b2 20vt project

[quattro-nick]

This is an example of the intercooler I used

[_ShurikeN]

Impressive amount of work done.

-330mm vent disc frontbrakes xyz with 6piston caliper
-s4 rear brakes with 266mm vent disc

Any detailed info about front and rear brake disks and rims specs?

[quattrostyle]

Looks okay, I don't want to cut the front of my car though, not even to install the engine.

[quattro-nick]

_ShurikeN:

front disc are from xyz 330mm.originally came from golf 4 big brake set
i made other front rotors for the disc with 4x108 and another brackets
I still have the original wheel flanges
at the rear i install 266mm vent disc from citroen berlingo 1.9d because this also
has 4x108,but you must adapt them
4 wheel holes and the centering hole must be drill bigger and i have removed 2mm from disc thickness
I have used the rear calipers from a urs4
you just need spacers to mount it with that disc setup
for the wheels,i have azev 17' inch 4x108 et 35

[_ShurikeN]

at the rear i install 266mm vent disc from citroen berlingo 1.9d

Such ones?

http://bremboaftermarket.com/En/Car_Disc_Catalogue/Catalogue_Detail_Image.aspx?Code=9ce0daf3-bf56-41f3-8728-a595cc0701d2

[quattro-nick]

yes,i think so

[quattro-nick]

@ quattrostyle: i dont cut in the front for installing the engine but for to place a large intercooler and so remain my nose still standard

[quattrostyle]

Well it's still cut That's why the new 5 pots are the way to go I think, lots of extra space in front of the engine