following on from JonRS2 post of parts required to replace lower door mouldings, does anyone know the part numbers for the metal strips to secure the mouldings (or do they come as an integral part of the covers). On my RS2 there are signs that the existing mouldings have a rubber or foam backing. Is this present on OEM parts or maybe is aftermarket fitted by a previous owner.?
Announcement
Collapse
No announcement yet.
Carbondesign RS2 lower door trims
Collapse
X
-
Hi,
My RS2 is missing lower door trim from the front door (drivers side LHD).
Audi tradition have them stock but i'm not sure what part i should order?
Is this the part that i need? Anything else to mount this?
1 x COVER 172,55 EUR
Article number: 8A0853959A GRU
Order number: 8A0853959A GRU
Thank you for the help.
Comment
-
Since this thread has become the go-to place for info on the lower trims, here's my fix:
A bit of stainless sheet bent in a steel brake and glued in with a suitable flexible adhesive. Fits like a charm, and there's no gap between the door and the trim piece.
Not much left of the original steel:
New steel fitted:
- 2 likes
Comment
-
Yea I just ordered some sills for my s2.1996 Audi S2 - 295bhp and 326lb/ft - Complete Rebuild Project
1994 Audi 80 - 2.0 8v (slow but reliable!)
Comment
-
Cheers Vas, that would be great. TBH I won’t trouble you yet unless I can get hold of all of them.
I need ideally perfect original parts to take patterns from - anything I make will be a 99.8% visual replica therefore any imperfections will be replicated also. Inserts would be stainless steel. It’s possible to repair some small cosmetic defects but that is all - the shape must be as newPanthero Coupé quattro 20vt
Indigo ABY coupé
Imola B6 S4 Avant
Comment
Comment