Announcement

Collapse
No announcement yet.

60-2 trigger wheel

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 60-2 trigger wheel

    Hi can you give me a price delivered to uk on a 60-2 trigger wheel to fit an aan front pulley please.

    unsure of size but im guessing you lads should know

    regards Sean
    1993 URS4 Avant Emerald Green 350+bhp
    1991 Ford Sierra Sapphire 4x4 in Magenta
    BoooOOOSSSSSTTTT BANG BANG CHIRP CHIRP

  • #2
    Originally posted by Sleeper_Avant View Post
    Hi can you give me a price delivered to uk on a 60-2 trigger wheel to fit an aan front pulley please.

    unsure of size but im guessing you lads should know

    regards Sean
    Hi,

    depends on what you want.

    I can ship you just the ring gear that you can weld to your stock pulley. available in various diameters, typical is 6.5 or 7". Those go for $35. Or I can send you a modified stock AAN crank pulley for $150 plus core, since you are in the UK its probably not practical to send me a core, so add $50 for a "no core" price.

    Shipping would be $50 to the UK (USPS flat rate box).

    do you need a bracket for a VR sensor as well or do you have that covered?
    Marc Swanson
    Proprietor, EFI Express
    95.5 //S6 Avant
    90' Coupe Quattro V8 4.2L twin turbo
    93' //S4
    83' UrQ
    97' F250 7.3 diesel

    Comment


    • #3
      Excelent, so $250 for a AAN crank pulley already done yeh?

      what price is the bracket then?

      will contact you ASAP when i get paid

      Sean.
      1993 URS4 Avant Emerald Green 350+bhp
      1991 Ford Sierra Sapphire 4x4 in Magenta
      BoooOOOSSSSSTTTT BANG BANG CHIRP CHIRP

      Comment


      • #4
        Originally posted by Sleeper_Avant View Post
        Excelent, so $250 for a AAN crank pulley already done yeh?
        yes. This is done by machining the outside of the pulley to put teeth into the face of the factory balancer.

        The result looks like this:



        what price is the bracket then?
        $75 for the bracket as shown in the pic above (a bit expensive, I know).

        if you do decide to go this route send me a picture of the back side of your current pulley, there are two varieties of these "aan" style pulleys. one style uses a thick washer with a short snout, the other uses no washer with a long snout.





        will contact you ASAP when i get paid

        Sean.
        cool, let me know.
        Marc Swanson
        Proprietor, EFI Express
        95.5 //S6 Avant
        90' Coupe Quattro V8 4.2L twin turbo
        93' //S4
        83' UrQ
        97' F250 7.3 diesel

        Comment


        • #5
          Well i`ll sort the bracket myself mate,
          its a non washer`d pulley.

          was gonna buy one from 34 ages ago when i bought their ECU but thaught prices and outright sale (no core) was a bit of a joke to be honest with 2 month wait time........

          will contact ASAP as said previous ok matey.

          Muchly appreciated

          Sean.
          1993 URS4 Avant Emerald Green 350+bhp
          1991 Ford Sierra Sapphire 4x4 in Magenta
          BoooOOOSSSSSTTTT BANG BANG CHIRP CHIRP

          Comment


          • #6
            Enjoying the post ... I have a S2 ABY, this solution is for my case?

            I'm from Rio de Janeiro - Brazil, what would be the value?
            Hug's
            Leonardo
            Audi A80 Avant S2
            Rio de Janeiro - Brazil

            Comment


            • #7
              Something like this should work. AFAIK it should be from some newer Audi but i dont have any better info right now.
              Attached Files

              Comment


              • #8
                that pic is a 1.4 16v polo crank seal. This solution only works if the ecu can use vr sensors. Otherwise EFI's solution allows you to fit a hall sender if necessary
                UrS6 Stroker + HTA3586 =

                Comment

                Working...
                X