do wagner tubular manifolds fit in a b3 saloon

[GazzaG60]

HI carsten

as you may remember I have the full wagner setup, manifolds, ic x member etc.

now I have no s2 but have a b3 saloon.

do the tubes fit under the bonnet?

do I need a different manifold. if so what do you fit a 35r to.

cheers

[Nik0las]

will fit don't worry...

[GazzaG60]

cheers

would seem a shame to not use what I have. im getting tired of the 16v now. I could run faster.

im going to Glastonbury then I may start prepping parts.

I expected it may fit ok and to be honest im more worried about hubs and space available when I go 5 stud.

[Nik0las]

for hub convertion you can use A4 b5 quattro hubs to 5x112

As I said don't worry about the space under bonnet, only difference is where battery is located, but this is easy fixable.

For 35r you have to think about drivetrain and I mean g.box and rear diff - b3 diff is same as S2 coupe but it might be on 3.75 ratio due to 4cyl 16v engine- however I'm not sure on this! And of course brakes but I don't think that I have to tell you this