Perfect PnP turbo for 2.2 20vt ?

[Kiku]

I believe this turbo might be the best PnP solution for stock flange 2.2 20vt manifold or tubular manifold with kkk flange.

Take a look: https://www.turbosystems.info/produc...e-turbocharger

[Costash]

Pnp only probably fitting side of it what we do with the mapping side? Needs a standalone ecu to get the best results from turbo.. Nice turbo anyway.

[Cordoba16vt]

What difference would the larger exhaust houing make, in spool terms , compared to n6 ( RS2 standard EH) ??? Very tempted to try this new exhaust housing , if available in such size ?

[vidar skotheim]

These are as fast as a 8 housing .

[ristokru]

With this turbo you need change rods also and ecu i believe..

[Airwolf]

I think its better options out there than a outdated kkk replica

[A80Avant]

It says its ceramic ball bearing and also has a billet wheel. Hardly outdated

[Zoig]

Am i missing something or would the coolant lines need to be relocated to the sides?

[rxl]

Maby the lines are not plug and play but it's a good alternative for outdated and overpriced rs2 turbo. This turbo can make more boost and for what it is is cheap alternative for getting some power on stock components.

[Airwolf]

It says its ceramic ball bearing and also has a billet wheel. Hardly outdated

But How does it perform?

[Morris400]

K24 7400 is a awesome choice.

[Kiku]

Coolant lines need to be reloated but thats a small set back i believe.
Realy would like to know how it works in real life

[Morris400]

The k24 7400 is plug and play, or at least
was for me. Only line I changed was the oil feed but its doable with the OEM lines. It performs very nicely.

[A80Avant]

But How does it perform?

Same technology as the Garrett turbos. I would expect a much improved spool