Announcement

Collapse
No announcement yet.

Help please with these clips

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Help please with these clips

    Does anyone know where I can buy these metal folding clips for s2 coupe headliner? There's one on the opposite side which is smaller and I need both.

    Thank you

    Sent from my SM-G930F using Tapatalk


  • #2
    Do you have some other photos of where they are located as it may help identify them.
    Greg

    S2Forum.com Administrator & Webmaster

    '93 Coupe with a few tweeks

    Comment


    • #3
      They are the metal surround trims for the front and rear courtesy light fittings?
      Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
      S2 Coupe... bit easier off the line...
      '03 ZX12-R daily hack.... lots of nice bolt ons...

      Comment


      • #4
        Are they a pain to get to or does the hole roof lining have to be removed. The reason I ask is there's a coupe sat up the scrap yard I could maybe grad them for you.

        Comment


        • #5
          They are hard to remove to keep them to re-use... A stanley knife can cut them out - keep an inch of headliner on all round, then it's 5 minutes
          Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
          S2 Coupe... bit easier off the line...
          '03 ZX12-R daily hack.... lots of nice bolt ons...

          Comment


          • #6
            I think he means the metal surround for the sunroof control panel and the one for the courtesy light.

            S2 Coupe 3B Project


            Ur quattro restoration

            S2 Avant

            Boost is the new rock and roll!
            sigpic

            Comment


            • #7
              Originally posted by LHD_Kid View Post
              They are the metal surround trims for the front and rear courtesy light fittings?
              Correct

              Sent from my SM-G930F using Tapatalk

              Comment


              • #8
                Originally posted by LSG View Post
                Are they a pain to get to or does the hole roof lining have to be removed. The reason I ask is there's a coupe sat up the scrap yard I could maybe grad them for you.
                I'm replacing the headliner and of course some of the old one was under it.

                Sent from my SM-G930F using Tapatalk

                Comment


                • #9
                  Originally posted by Greg_S View Post
                  Do you have some other photos of where they are located as it may help identify them.
                  Here's a photo

                  Sent from my SM-G930F using Tapatalk

                  Comment


                  • #10
                    Originally posted by Greg_S View Post
                    Do you have some other photos of where they are located as it may help identify them.
                    Here

                    Sent from my SM-G930F using Tapatalk

                    Comment


                    • #11
                      What's wrong with what you have - once you have straightened them out? I cut slots in the tabs to make them bend easier when removing and refitting mine
                      Honda CBR 1100XX Blackbird Turbo....undergoing major changes.....
                      S2 Coupe... bit easier off the line...
                      '03 ZX12-R daily hack.... lots of nice bolt ons...

                      Comment


                      • #12
                        Originally posted by LHD_Kid View Post
                        What's wrong with what you have - once you have straightened them out? I cut slots in the tabs to make them bend easier when removing and refitting mine
                        Need another set for another headliner

                        Sent from my SM-G930F using Tapatalk

                        Comment

                        Working...
                        X