Originally posted by Lago Blue
View Post
yes i mean the oil cover.
yes but there is no idle speed while i does not use the throttle the car fel out.
yes i spray with carb cleaner in it and use some compressed air to clean it. in the intake was again that black fluid. i dont know why its in there.
the New MAF sensor was complete with body. i place the whole thing into the car.
yes but no response while i disconnect it. only while i open the pipe from the intake manifold the idle go higher.
its difficulty to check the firing because the car have no idle.
i mean the tube that going to the idle switch. i know there is no vacuum.
the vacuum is about 10 inHG with warm engine. but thats because the idle is so low. when i give some gas to about the 700rpm its about 15/16 inHG but thats not higher because the throttle is open than.
i have place all new sparkplugs why does one sparkplug doesnt spark? maybe the rotor bad?
Comment