Stroker with GTX35/82 on E85

**hammer** · 18 November 2012, 13:38

downpipe 3.5"

Attached Files

**hammer** · 18 November 2012, 17:12

@dyno

***Greg_S*** · 19 November 2012, 18:46

Neat solution using the uniballs. Would need custom wishbones like you have to do it I guess

**hammer** · 21 November 2012, 20:22

my frist version was with the custom wishbones, but the unibal didn't hold long time. think the unibal with 12mm in and 20mm out wos to small.

**hammer** · 21 November 2012, 20:38

Originally posted by Biturbo

Very impressive result on dyno.That should run in 10s.That is your 60ft time for that run?
Can you write full your engine mods?

for the 1/8 mile 169km/h and 7.3s.

**hammer** · 21 November 2012, 20:44

a few pic from my torsen after 500km

Attached Files

**Biturbo** · 21 November 2012, 23:50

Originally posted by hammer

for the 1/8 mile 169km/h and 7.3s.

60ft?Street tires?

**Rocco** · 21 November 2012, 23:59

Originally posted by hammer

a few pic from my torsen after 500km

and now what kind of diff do you have?

**hammer** · 22 November 2012, 16:10

Originally posted by Biturbo

60ft?Street tires?

i have no time for 60ft and the tires wos 7 jears old slicks 230/640/17.

**hammer** · 22 November 2012, 16:35

Originally posted by Rocco

and now what kind of diff do you have?

i bought another diff and welded it. that wos the cheapest way.
does anyone know a cheap lsd?

**vcosmin** · 22 November 2012, 20:59

skyline 4.11 rear diff is strongest, but need a lot of modification

Comment