4th Time Lucky

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tractor Dave
    S2Forum Zealot
    • Dec 2017
    • 5991
    • Country: Wales

    #61
    I don't think so. Just check the cables are all still attached. Even with foam breaking up there is normally a little heat.
    Nothelle S2 Avant
    Black Ur project
    Silver Rs2 Project gone
    Ocianic Ur project gone
    S2 Coupe project gone
    Urs6 plus project gone

    Comment

    • hashluck
      S2Forum Enthusiast
      • Jan 2020
      • 108
      • Country: United Kingdom

      #62
      Originally posted by hashluck
      I also struggled with emissions at last MOT but had no codes. I have run a Cat Clean product through for now as I ran for a while with a misfire (coil pack) and probably sooted up the sensors and cats a bit in the process. Since the clean my mpg has improved but that may be wishful thinking.
      Pleased to report that after running the Cat Clean through the emissions are back to well within MOT standards. Worth a try.

      Comment

      • steverrquattro
        S2Forum Maniac
        • Oct 2006
        • 788
        • Country: England

        #63
        Originally posted by Tractor Dave
        I don't think so. Just check the cables are all still attached. Even with foam breaking up there is normally a little heat.
        I would say there is a little bit of warmth. I took the middle vents out last night and there were small pieces of foam present.

        Do you think it would help if I put the compressed airline in there?
        Attached Files
        Steve

        1990 RR 20V
        1982 SWB UR - RS2 Engine

        Comment

        • Tractor Dave
          S2Forum Zealot
          • Dec 2017
          • 5991
          • Country: Wales

          #64
          I would just hoover up what's there.
          Nothelle S2 Avant
          Black Ur project
          Silver Rs2 Project gone
          Ocianic Ur project gone
          S2 Coupe project gone
          Urs6 plus project gone

          Comment

          Working...