Buying an S2 Coupe - Am I walking into a world of pain.

Collapse
X
 
  • Time
  • Show
Clear All
new posts

  • B5NUT
    replied
    Originally posted by John.

    Nice one, was it just an aerosol type lube ?
    Yes, the Halfords version was out of stock so got the WD40 silicone spray.

    Leave a comment:


  • Bowie69
    replied
    Originally posted by B5NUT
    Well with the modified tool and silicone lube all bushes now pressed in. Thank god for that.
    Very well done!

    Leave a comment:


  • John.
    replied
    Originally posted by B5NUT
    Well with the modified tool and silicone lube all bushes now pressed in. Thank god for that.
    Nice one, was it just an aerosol type lube ?

    Leave a comment:


  • B5NUT
    replied
    Nope, it's all a massive pain in the ****.

    Leave a comment:


  • Tractor Dave
    replied
    If that's what you have them go 50mm. I was reading a thread here that suggested Bilstein 033-3086 but they are 55. Now you have posted that pic I will check mine before I order anything. I read North American cars were 50mm. It's all very strange.

    Leave a comment:


  • B5NUT
    replied
    This is the original shock from my 95 ABY S2 coupe, which shows 50mm. Are the rears not 55?

    shock2.jpg

    Leave a comment:


  • Tractor Dave
    replied
    Originally posted by newsh

    This is what I have on my Avant , same fitment as ABY coupe.
    I thought all the later models were 55mm. Do they come with compensating bushes

    Leave a comment:


  • B5NUT
    replied
    Just a shame about the two bushes that never made it RIP...

    Leave a comment:


  • newsh
    replied
    Originally posted by B5NUT
    Well with the modified tool and silicone lube all bushes now pressed in. Thank god for that.
    Top of the class!

    Leave a comment:


  • newsh
    replied
    Originally posted by B5NUT
    So still looking around for front shocks, just wondered if anyone has a part number of a shock that fit.

    Found this Bilstein shock which looks to have the right dimeter and it states it fits the car, but so have other shocks that don't fit!
    shock.jpg
    This is what I have on my Avant , same fitment as ABY coupe.

    Leave a comment:


  • B5NUT
    replied
    Well with the modified tool and silicone lube all bushes now pressed in. Thank god for that.

    Leave a comment:


  • B5NUT
    replied
    So still looking around for front shocks, just wondered if anyone has a part number of a shock that fit.

    Found this Bilstein shock which looks to have the right dimeter and it states it fits the car, but so have other shocks that don't fit!
    shock.jpg
    Last edited by B5NUT; 2 November 2021, 14:46.

    Leave a comment:


  • Fat Audi 80
    replied
    Originally posted by B5NUT
    If I cannot get the rest in tomorrow then I will go supaflex. I'll give them one more try as they are cheap enough if they get damaged.
    You are braver than me. I went straight to split bushes!

    Good luck!

    Leave a comment:


  • B5NUT
    replied
    If I cannot get the rest in tomorrow then I will go supaflex. I'll give them one more try as they are cheap enough if they get damaged.

    Leave a comment:


  • Fat Audi 80
    replied
    Originally posted by Bowie69
    Well done!

    Some silicone lube will make it slide in way easier.
    Always....

    Leave a comment:

Working...