Suggestion on how to output 320x234 via VGA?

[Jonas_R]

I'm playing with a little carpc for my RNS-D.

The RNS-D has 5" sharp monitor with a resolution of 320x234.

The RNS-D unit excepts composite sync (which basicly is scart).

Plan was to use RoadRunner or similar and make a custom skin.

Now the problem is how to output 320x234 on the PC.

I'm using a 1,6 ghz Z530 atom processor with the intel GMA500 graphics card. I have tried using intels EGMD and make some custom resolution but to no help.

Any other suggestions, perhaps some sort of vga to scart adaptor. But not sure how the downscaling would be.

Jonas

[sidrick]

I used a VGA to scart adapter when building my NES PC. It was ****ing *****.

[Carl Avant]

These guys are very clever .... they figured out and supplied me with an adaptor for a professional RGB Sony projector a few years back that needed a special scart/composite/rgb signal booster.

Well worth keeping their details

http://www.keene.co.uk

[irishs2]

There are a few utilities that the mame arcade guys use to get 15khz signals , such as soft15khz or powerstrip to create a custom mode for your graphics card