Picture is to gain your interest !
might be of interest to some guys one here .
we are currently seeing positive feedback so it looks like it’s going ahead .
We have a opportunity as a Community to get a set of 16 inch Ronal replica Wheels into production .
These will be cast wheels made by 3SDM a we established wheel manufacturer.
It will require a minimum of 20 sets for a production run , I have no lead time on them yet as these would have to be per sold for this to go ahead .
At the price of 20 sets it works out cheeper then buying 215 50 15 tyres for our 15” so for me it’s a no brainer.
And with going 16” it gives you the opportunity to use bigger break calipers and discs.
I will leave the last email for clarity from Dylan at 3SDM with prices .
 To develop the wheel in 16x8.0 ET 24 cast, we are looking at the following scenario;
20 sets pre-sold - unit cost £165ea
40 sets pre-sold - unit cost £120ea
80 sets pre-sold - unit cost £95ea
plus local taxes and shipping
Wheels fully painted white or silver (minimum colour run of 10 sets per colour)
This is based on production in an OEM level factory, not cheap chinese rubbish.
I hope you all jump on bored as I would like to get this off the ground for all to enjoy.
Kind regards john 
might be of interest to some guys one here .
we are currently seeing positive feedback so it looks like it’s going ahead .
We have a opportunity as a Community to get a set of 16 inch Ronal replica Wheels into production .
These will be cast wheels made by 3SDM a we established wheel manufacturer.
It will require a minimum of 20 sets for a production run , I have no lead time on them yet as these would have to be per sold for this to go ahead .
At the price of 20 sets it works out cheeper then buying 215 50 15 tyres for our 15” so for me it’s a no brainer.
And with going 16” it gives you the opportunity to use bigger break calipers and discs.
I will leave the last email for clarity from Dylan at 3SDM with prices .
 To develop the wheel in 16x8.0 ET 24 cast, we are looking at the following scenario;
20 sets pre-sold - unit cost £165ea
40 sets pre-sold - unit cost £120ea
80 sets pre-sold - unit cost £95ea
plus local taxes and shipping
Wheels fully painted white or silver (minimum colour run of 10 sets per colour)
This is based on production in an OEM level factory, not cheap chinese rubbish.
I hope you all jump on bored as I would like to get this off the ground for all to enjoy.
Kind regards john 
Comment