UR Quattro panel availability?

[Monkeymagic]

Do any members on here know what panels are available for the UR Quattro's please? My friend runs a classic car firm normally specializing in Triumphs and Jaguars. However they have taken on a UR quattro that has been dipped, its a bit of a sieve currently and the welder is pulling his hair out a bit with it.

The customer has supplied outer sills but the inners are full of tin worm as is the boot floor, he has also provided the rear panel.

Ill get some pictures loaded of the problem arears later.

Thanks in advance. Steven

[Tractor Dave]

Audi Tradition do have a few but not many

[Monkeymagic]

I’ll have to have a look, I’m guessing inner sills and boot floors may not be readily available…

[sal_s2]

The boot floor consists of quite a few skins, especially around the spare wheel well. I think most people end up fabricating sections themselves.
The genuine outer sills come with the reinforcement built in

[Tractor Dave]

I do have a new nearside front chassis leg if they need one

[4WDrifter]

I managed to get a brand new old stock front passenger wing

https://www.s2forum.com/forum/member-s-area/projects/2129868-ur-quattro-front-wing#post2129955

[Ian Simmonds]

Most of the Ur OE panels from the 1990’s fit like socks on a rooster. The presses were well and truly knackered by the end.

[Monkeymagic]

I’ve had a look and most of the panels required are listed on tradition, however the owner states he cannot get them shipped to the UK. I thought tradition had sorted out all these niggles?!

[johne]

I believe they have but only recently. When did the owner last try?

[Monkeymagic]

That’s exactly what I said to him, I knew there were issues but were recently shipping again.