wheel spacers

[MattS2]

Get off ebay Bry and give the rest of us a chance!

Matt.

[Knight Rider S4]

Oh theres better than that
http://cgi.ebay.co.uk/ws/eBayISAPI.d...MEWA:IT&ih=017


Have sourced what i am looking for ..For the great sum of £100 front and back with studs (H/R)

[Nuvo]

Steve that eBay link is for a TT so wouldn't be much use (assuming it is for the first gen).

What widths did you go for in the end?

[BRY]

H&R spacers that are double drilled are 5x100 and 5x112.

[Nuvo]

Doh! I was too quick with my reply. I didn't check the pic, only the description.
You're dead right of course

[Knight Rider S4]

Well today has been he first day i have been off were i did not get roped into christmas shopping or it was not -10 outside so decided i would get these wheels fitted front went on no problem (15mm spacers) went and put the rears on with 10mm spacers looked really tight!! and guess what, is was, rear are rubbing against suspension ....so it looks like 15mm for the rear as well .......or will i get away with putting the 10mms on the front and 15 on the rears??........

[Rusty]

What would the recommended offset be for a coupe? 15mm all round to take it to ET33?

[Animal Mother]

My Delta Mic spacers arrived today and they are quite good. Heavy but good. Will let you know how well they fit.

[tom]

What would the recommended offset be for a coupe? 15mm all round to take it to ET33?

I have 20mm on my S2 Coupe with 18" S8 AVUS rims plus 225/40 P ZERO's. No problem at all. The car is not lowered. Arches not rolled. If somebody is interested about nice alloy hubcentric spacers i can source them with really nice bolts ~140 Euro, 4 pcs set.

[jeroen]

sounds good! though do you maby have a picture so i can see how wide the wheels are with 20mm spacers?

and are those alu or steel?

[pastures16]

these are big but not bad
http://cgi.ebay.co.uk/Audi-16mm-hubc...QQcmdZViewItem

[HPmuirt]

these are big but not bad
http://cgi.ebay.co.uk/Audi-16mm-hubc...QQcmdZViewItem

Damn expensive compared to £35 for the steel ones though

Anyone know of a better source of aluminium spacers or is it better to get steel?

Cheers n

Si

[s2_bo]

Damn expensive compared to £35 for the steel ones though

Anyone know of a better source of aluminium spacers or is it better to get steel?

Cheers n

Si

These guys are good:

http://www.wheels.uk.com/acatalog/wheel-spacers-audi-s2.html

They are on ebay too and about 30% cheaper there..

[HPmuirt]

These guys are good:

http://www.wheels.uk.com/acatalog/wheel-spacers-audi-s2.html

They are on ebay too and about 30% cheaper there..

Thanks Bo, that's cheaper for alloy, but can't find them on the bay

Cheers n

Si

[s2_bo]

Ok, just call them and ask for a better price. Thats what i did and they did them at 35% discount and reduced shipping.

Good luck.