What projects would you like to do?

[shark_90]

One of the lads on Tyresmoke has a VW Caddy with a 2.7T S4 engine in the back, RWD. Used to be a 1.8T until he made a hole in the side of the engine

He also has a Mazda B2200 with a V8 in it and air or hydraulic suspension, can't remember which.

[84urq20Vt]

I'm currently thinking hard about converting a US spec B4 ('95) 90q (V6) to AAN power, S2 grill, bumpers, valence, bigger wheels, brakes etc. I'm looking forward to learning more about S2s and RS2s and what kind of Euro parts I'll need for my project. I'll do a quickie intro on myself on another thread but my toy is currently an 84 urquattro with a 3B motor, somewhat RS2'd and about to go coil on plug soon.

Brandon
'84 ur quattro 20Vt
'01 S4
'95 90q20Vt ???

[Acidburn]

somewhat RS2'd and about to go coil on plug soon.

Brandon
'84 ur quattro 20Vt
'01 S4
'95 90q20Vt ???

If your not going over 450ish bhp i'd stick with the dizzy as its good for around that.

[quattronutter]

mk2 golf with a veyron engine would do me,might be pricey though....

[Ian Simmonds]

mk2 golf with a veyron engine would do me,might be pricey though....

what's wrong with a mk1..?

[quattronutter]

i already have a nice mk1

[Ian Simmonds]

....................

[Acidburn]

mk2 golf with a veyron engine would do me,might be pricey though....

i'd love to see how they would deal with the heat from the engine/turbo's

[Acidburn]

Still think one of the best projects would be to do a space frame s2 like

http://video.google.co.uk/videoplay?docid=6369021561677387492&q=audi+s2+700&total=20&start=0&num=10&so=0&type=search&plindex=1

There's gotta be quite a bit of weight to loose from the s2 shell.

[Puglife]

One of the lads on Tyresmoke has a VW Caddy with a 2.7T S4 engine in the back, RWD..

Got videos of that and used to be on the Caddy forum... he has built some mad stuff as well iirc?

I'm considering building a nice daily retro car with the 7a engine i recently bought... RWD and 7a power...

[Acidburn]

Do something slightly different with it, providing you can sort the box etc why not put it in something like a beemer or even cut/modify the floor pan and slap it in a mk4 escort, i've been tempted to do that a few times.

[Puglife]

I detest fords................
Having said that what i'm "contemplating" putting it in isn't much better, but retro not Rotro

[Acidburn]

I detest fords................
Having said that what i'm "contemplating" putting it in isn't much better, but retro not Rotro

Lol well I personally don't mind either escorts or sapphires as i've owned a few and I found they was easy to work on/modify and could be quite interesting when done.

Seriously tempted to get one as a daily when the s2 comes off the road.

What car was you thinking of? ever thought about putting the 7a engine into a scimitar (if you can find a good one) as they have a nice engine bay size (once you remove the spare wheel and are rear wheel drive.

[Puglife]

1969 and RWD.....
Gearbox and axle are the only two points of concern...

But i digress, my quattro is THE most important project at moment lol. And its costing me alot...

[RustyNut]

If I ever finish my current project (90q20vt) my next one will be a mk3 Cortina GT (very rare 2 door) with a cosworth V6. Retro Drifter! Love old fords..