prop shaft center bearing

[ryster]

just looking on 034 and found 4kg/80/90/coupequattro driveshaft support bearing is this the same for s2 aby prop center bearing or not?
its $52 and vag parts don't do it any more and was i quoted over 130 quid else where for audi part .
i would link pic if new how
cheers

[Knight Rider S4]

There is a bmw one you can use and it costs buttons

All you need to know is here

http://www.s2forum.com/forum/showthread.php?t=7823&highlight=propshaft

[A80Avant]

i have the BMW part,but you have to mount itin reverse so that it does not squeel again,as the BMW part is very elastic and the rubber wont do the job well unless fitted in reverse.
however with the help of rob(GT500) i found the OEM part and im going to fit that at some point...no match really..Costs around 100GBP

[JariP]

Papvas, can you post a picture of that OEM part? I've had the bmw part on for something like four years without any problems.

[rs2315]

i have the BMW part,but you have to mount itin reverse so that it does not squeel again,as the BMW part is very elastic and the rubber wont do the job well unless fitted in reverse.
however with the help of rob(GT500) i found the OEM part and im going to fit that at some point...no match really..Costs around 100GBP

Yep Rob's just fitted a real deal bearing for me.

BMW bearing fitted to my Audi, no thanks.

rs2315.

[ryster]

hi so does the 80 quattro coupe have the same center bearing as an s2 aby ?
cheers

[A80Avant]

here it is