Zermatt silver urq

[Acidburn]

Some closer pics for spink - the front of a urq has these tags to hold the top of the urq bumper to the car, normal cq's/gt's will not have these





The rear of the car has a flat panel that sticks out and holds the lower section of the rear bumper on, most are rotted away if you see a car that has the lower outer lip section sagging, mine was starting to go and the inner bumper section was needing work (literally disintergrated ) hence mines got a new one on now and a new section for the lower lip thanks to quattronutter's hard work

[Acidburn]

Started off today with this



and the yellow tape was stock audi and falling off so bought some self amalgamating (spl?) tape to repair this, with the help of big daddy spent an hour or so tidying this up earlier ready to go on the urq



sorry I didn't get any close up shots, I may be able to tomorrow if I get a chance




Also took an angle grinder to the recaro's earlier - end result with the help of big daddy once again and quattronutter these are now fitted in the car properly.

So work is happening lol.....

[Ducky]

Man I wish I had a unit as big as yours!

[pixsaudisex2]

Looking good

[Jamo]

Man I wish I had a unit as big as yours!

It's the new garage of Bahnstorm.net aka Quattronutter, it's massive and a really good setup

[Acidburn]

It's the new garage of Bahnstorm.net aka Quattronutter, it's massive and a really good setup

And i've dropped your bits off this morning there. Used all that diesel from the other day fitted the other recaro so they are both in there now and both work.

[gavs20v]

And i've dropped your bits off this morning there. Used all that diesel from the other day fitted the other recaro so they are both in there now and both work.

All that free diesel? Lol
Gav

[Acidburn]

All that free diesel? Lol
Gav

Yup, to say I wasn't hanging around this weekend is an understatement. 371 miles on that, even made a detour with matt/big daddy on here from quattronutters earlier with the sole purpose of chasing a portable bbq machine (merc benz diesel) that had some serious turbo issue's to see if it would pop on the way down the m1, missed two junctions and ended up detouring thru mk back to newport pagnell and truly cooked the brakes. The merc was a good laugh, everytime he backed off the smoke screen was quite superb and then a ford cougar v6 and a couple of other cars joined in

[Acidburn]

Been a couple of weeks since an update.

Got the complete dash section with wiring for the diff lock panel today (cheers puglife) so I can re-wire the dash section and update to the later style dash/clocks (I did this before but somethings not right with the wiring)

Also modded a steeringwheel boss so I can fit my nardi steering wheel with the help of my mate alan, didn't take too long and looking forward to getting the car a bit closer to road wortheyness.

Now for the fun bit - Ever wondered what a 60 ish k engine looks like inside, I got bored today so opened up the aan engine so I can take the head along with a spare converted 7a head to be fettled with.












The goldish colour stuff on the side of the head is waxoil, the underside of the car and most of the engine bay etc was covered in it, it means there's no rust but its a pita when trying to undo bolts, still everything came off easily and didn't take too long, even the heat shields on the turbo side of the head was in good condition

[Error404]

Is that going in yours mate?

[Acidburn]

The block definately is, i'm not sure about the head yet as I currently have two, this one and a 7a one thats been converted over, really not sure which one to have the work done on

[s2driveruk]

looking good matey, sorry not been about for a while, all been a bit manic then had a few days away. catch up soon and keep up the good work, any chance it'll be fit for ADI???? :-)

[gavs20v]

Pete, thats not waxoil. Its powersteering fluid thats got hot. It had a longterm leak before i got it, over time its covered everything in the stuff. Its a pig to get off as youve probably found out. Good to see my old aan will be going into a good home
Gav

[Jamo]

looking good matey, sorry not been about for a while, all been a bit manic then had a few days away. catch up soon and keep up the good work, any chance it'll be fit for ADI???? :-)

More chance of Madwolf hosting Pimp my Ride

[Jonnybravo]

More chance of Madwolf hosting Pimp my Ride

Good update Pete, engine looks to be in good shape.

Just needs a BIG turbo