Aux rad rubber bobbins -pn help please

[Christophski]

Hey guys

Does anyone know the pn for the little rubber cotton reel mounts the aux rad sits on? There is 3 that sit under the rad. I bet the are nla.....

Failing that does anyone have some I can purchase or know where I can get some? Or does anyone know the sizes of them so I can try to find a suitable alternative?

Thanks
Chris

[LHD_Kid]

Hey guys

Does anyone know the pn for the little rubber cotton reel mounts the aux rad sits on? There is 3 that sit under the rad. I bet the are nla.....

Failing that does anyone have some I can purchase or know where I can get some? Or does anyone know the sizes of them so I can try to find a suitable alternative?

Thanks
Chris

Sorry, don't have the number, but they are available from the stealer- and not too expensive.

Buy 3 as its the same one used on the top of the main rad too...

I think there are only 2 under aux rad

[Christophski]

Ahh cool. Thanks... Anyone able to help with a PN?

[John.]

I replaced the fuel filter mounts on my CQ a few years ago and at the time thought they were the same as the auxiliary radiator mounts, not 100% sure though.
Filter mount part numbers are;-
431616769 - Buffer - £13.94 each +vat
810906219A - Bearing- ££4.95 each +vat (these are the ones I think)
I also reckon they're the same as the oil cooler mounts on my 1979 Honda CB900 !
John.

[Error404]

Get the thread side & search ebay for "anti-vibration mount"

[newsh]

6mm thread IIRC (10mm spanner)

[newsh]

http://www.ebay.co.uk/sch/i.html?_od...nt+m6&_sacat=0

[Christophski]

Thanks guys. John, don't suppose you know how long the rubber bit is do you so I can find the right ones? Seems there are several different lengths available....

[John.]

Thanks guys. John, don't suppose you know how long the rubber bit is do you so I can find the right ones? Seems there are several different lengths available....

I'll take a look tomorrow.

[Christophski]

Cheers bud

[newsh]

Aux rad mounts are appox 25mm diameter and 12mm tall. They're a bit different to the ones on ebay cos the lower part of the mount forms a cup. There are 2 mounts underneath which bolt to the snub mount bracket and one on top but I think the top one is just a grommet.

There are 2 on the broken rad I have here but whether I can get them off without breaking is another matter.

[Christophski]

Cheers bud, let me know if you can. If not no worries. Will carry on looking to see what options are out there. The ones I had all broke whilst removing my old aux rad unfortunately

[newsh]

Well I got one off, the other one broke the stud off.. I reckon the ones from the stealer might be the best bet.

[Christophski]

Can you put a pic up of the complete one please bud in case I need to go to eBay?

[Christophski]

Cheers for trying though john appreciate it