Suspension parts for my URS4

[newsh]

Heres the top mounts?

http://www.ebay.co.uk/sch/i.html?_fr...09522&_sacat=0

[bikerjim]

******, sorry

[hunker7]

Heres the top mounts?

http://www.ebay.co.uk/sch/i.html?_fr...09522&_sacat=0

Those are for FWD, remember changing these on my A100.

[newsh]

Those are for FWD, remember changing these on my A100.

That's weird, they come up listed for URS4 AAN

[hunker7]

That's weird, they come up listed for URS4 AAN

I know, that's why I usually try to check OE numbers, can't trust them lists

[Vorsprung durch Technik]

There is no doubt about it that rear bushes are very difficult to source.I tried a while ago and got a complete blank.Fronts is easy,rear not for some reason.Plus audi have stopped making some of the bushes we need only in the last year or 2 according to the Bilstine site.

[hunker7]

As I said, rear top mounts from Audi is £88 a piece. I think front is easier to source, because quite a lot of parts are same as FWD, whereas rear changed drastically between FWD and Quattro.

[Vorsprung durch Technik]

Thats it Janis the C4 quattro rear is too niche.

[hunker7]

Can the alignment go out if top mount is knackered? Because I've just noticed a bad knock on the rear drivers side, and on that side inner side of the tyre is bald.

Also, does anyone have picture of rear top suspension mount? Just to see how different it is.

[hunker7]

Quattro's without rear stabiliser, have the cheap and readily available mounts, one's with the stabilizer comes with one's that can't be found in europe (at least i can't) and cost £88 per mount at dealers.

[hunker7]

Found on quattroworld. This is the bad boy. Completely different to one without stabiliser. Everyone says it costs a bloody fortune, and 3rd party companies do not make them either.

Will be taking kine off tomorow to make sure that's the culprit, before I spend over a 100 quid.

[newsh]

Yes, if the top mount goes then the alignment will be drifting in and out

[hunker7]

Thanks, not good news then.